Payment & Shipping Terms:
|Name:||Flexo Printer Slotter Machine||Design Speed:||180pcs/min|
|Economic Speed:||150pcs/min||Standard Plate Thickness:||50mm|
|Thickness Of The Board:||2-11mm||Maximum Depth Of Slotting:||600mm|
flexo printing equipment,
carton die cutting machine
1)Electric machine control clutch bell , moving last warning bell ring , ensuring the safety of operation personnel.
2)Drive shaft with a safe clutch to avoid misuse and damage to the machine (the machine is not fixed, the host can not start operation).
3)Pneumatic interlocking device .
4)Host motor start up protection device .
2.Adsorption leading edge Feeder system
1)Lead edge feeder institution can greatly reduce clogging phenomenon in the process of cardboard paper.
2)Suction fan auxiliary feeder,make sure the winding paperboard feeding smoothly,The wind volume can be adjusted according to the size of the board.,The maximum guarantee of the vacuum adsorption of cardboard, so that more accurate to send paper.
3)Front baffle and back baffle adopt manual adjust gap, feeder lift-right baffle adopt electric adjust gap.
4)Feeder wheels adopt polyurethane material made,Large friction and long life.
5)It suitable for 3layers,5layers and 7layers corrugated cardboard, include E flute cardboard.
6)Supply paperboard counter,set-up and Display production quantity.
1),Equipped with dust removal mechanism ( remove dust brush ), effectively remove cardboard surface impurities , improve the quality of printing .
1)Out diameter is 127mm.
2)Seamless steel pipe , parcel wear-resisting rubber , correction and balance
3)Lower feed roller chrome plating.
4)Feeder Paper roll gap dial manual adjustment, adjustment range 0-11mm.
5.Operation control switch (PLC computer control)
1)The control panel is equipped with 10 Inch Touch screen, can control the paper feeding, printing, slotting, die cutting, easy to operate.
6.Automatic zero return device
1)Paper feed, printing, slotting, cutting part of the electric automatic return to zero.
2)In general, the use of automatic paper box to zero device, try to print two can be adjusted to the correct position, reduce waste.
1)Out diameter is 405mm(include printing plate 410mm).
2)Steel plate material, surface grinding, hard chromium plating.
3)Balance correction, smooth operation.
4)Fixed ratchet wheel shaft.
5)Full format plate ditch, suitable for 9mm hanging version.
6)Loading and unloading printing plate, pedal switch electric control positive and negative.
7)Printing roller clearance dial manual adjustment, adjust the range of 0-11mm.
2.Printing pressure roller
1)Out diameter is 159mm.
2)Steel pipe surface grinding, hard chromium plating.
3)Balance correction, smooth operation.
4)Printing pressure roller gap dial manual adjustment,adjustment range 0-13mm.
5)Feeder roller gap dial manual adjustment, adjustment range is 0-13mm.
3.Metal anilox roller
1)Out diameter is 198mm
2)Steel pipe surface using advanced electroplating hard chromium technology, hard, smooth and wear-resistant.
3)Dot uniform, uniform on ink.
4)Prolong the service life of the plate and rubber roller.
5)Anilox roller gap dial manual adjustment.
1)Out diameter is 180mm.
2)Steel pipe surface coated with wear-resistant rubber.
3)High special grinding rubber roller, ink effect is good.
5.Feeder paper up-down roller
1)Up roller:diameter is 100mm Seamless steel pipe, with 2 paper feed wheel.2),down roller:out diameter is 159mm Seamless steel pipe, surface grinding, hard chromium plating.
3)Feeder roller gap dial manual adjustment,adjustment range is 0-13mm.
6.Phase adjustment mechanism
1)Planetary gear structure.
2)Horizontal position, manually adjust the distance of a total of 20mm.
3)The printing plate roller adopts frequency converter to adjust the phase, return to zero and adjust the speed of the plate, adjust the version of high precision.
1),Pneumatic diaphragm pump for ink stability, simple operation and maintenance.
2),Ink filter, filter impurities.
8.Printing phase fixing device
1)Pneumatic brake mechanism.
2)When the stage is separated or adjusted, the brake mechanism is restricted to rotate, and the fixed point of the original gear position is maintained.
Slotting unit(with creasing part)
1.Electrical adjustment the cross range moving of the four slotting knives pedestal.
2.Synchronous adjustment the space between the two slotting knives ( the height of box)
3.Synchronous moving the upper and lower slotting knives, paper-kicking knives, up and down creasing wheel.
4.Slotted phase using LCD screen control and electric digital 360. (run, stop, all can be adjusted)
Alloy steel materials, hearing treatment, grinding and tooth form slotting knife, width is 5-7mm
Die cutting unit
1.Roller is high quality steel surface hard chromium plating,correcting and drilling balancing,Increase the stability and reliability of its operation.
2,Die roller and soft roller adopt International standard size,knife die roller diameter is 260mm, add up die mould diameter is 310mm,soft roller diameter is 281mm(Rubber sleeve diameter is 297mm),Can be in any place to buy the right template and rubber gasket .
3,Knife die mould roller and rubber pad roller gap adopt manual adjustment .
4,Die cutting roller phase adopt planet structure,High precision , large bearing capacity , stop , can be 360 ° electric digital adjustment operation
5, When the feeder paper is stopped, the soft roller rises automatically, and reduces the wear of the soft roller.
6,Rubber pad adopt Shanghai production of poly (amine resin felt), can achieve 100% cut off rate, smooth cut, the replacement of the rubber pad order should be based on the loading and unloading operation manual.
7,The rubber pad roller adopts the mechanical cam type moving (30mm) device, each knife is in different positions, and effectively prolongs the service life of the felt sleeve.
8,Die cutting up-down roller diameter is different, but the line speed is the same. It can control the die - cutting knife in the circumferential direction of the infinite circle of work, so that the rubber sleeve wear more uniform.
9.Line speed compensation device, when the soft roll diameter change, automatic tracking compensation of line speed automatic compensation device, without manual adjustment, to ensure that every batch of cartons die-cutting of exactly the same size, and felt sleeve and a knife mold prolongs the service life of.
10.The soft roller automatic repair device can be worn after the felt of the felt cover for many times to repair, after the repair of the felt cover smooth finish, keep the same with the new felt the same as the use of the performance. The repeated use of Zhandian rate greatly improved.
Vibrator Stacker unit
1. Paper-receiving arm can be operated by hand ,the receiving paper height can be choosed freely.
2. Paper-receiving arm belt can adjust the tension and loosen lonely.
3. Receiving paper platform rise and fall are driven by the powerful chain.
4. Receiving paper platform is automatically adjust the inclination according to the cardboard rising, the rising motor with electrical braking function, so the platform can keep the fixed position.
5. Paper plate with pneumatic action, when the cardboard get the predetermined height, it can hold out automatically.
6. 1600mm the cardboard piling height is 1600mm.
7. Transfer belt driven motor 2.2kw(adjust the speed and control) 1set
8. Elevator motor3kw 1 set
9. Receiving paper arm cylinder80×300(with three five way electromagnetic valve)
10. The system is 5.5 meters , that has the receiving paper part, transmission part, collecting paper, connected with friction belt to transfer the cardboard, paper receiving part is the cylinder lifting, fasten the belt wheel lonely.
11. With two fan, and automatic clean the waster paper
Contact Person: Roy Xu