Payment & Shipping Terms:
|Name:||High Definition Corrugated Carton Flexo Printing Machine||Model:||1200*2800|
|Machine Inside Width:||2800 Mm||Max. Paperboard Feeding Size:||1200*2500 Mm|
|Min. Paper Size:||350*800 Mm||Max. Printing Size:||1200*2400 Mm|
|Working Speed:||150 M/min|
flexo printing equipment,
carton die cutting machine
High Definition Whole Vacuum Flexo Printing Slotting Die cutting Machine
|1||Machine inside width||mm||2800|
|4||Max feeder paper size||mm||1200×2500|
|5||Min paper size||mm||350×800|
|6||Max printing size||mm||1200×2400|
|7||Interval one paperboard feeder size||mm||1400×2600|
|9||Standard plate thickness||mm||7.2|
|10||Thickness of the board||mm||2--11|
|11||Minimum slotting spacing||mm||260×90×260×90|
|12||Maximum depth of slotting||mm||600|
1, Machine clutch
1)Electric machine control clutch bell , moving last warning bell ring , ensuring the safety of operation personnel.
2)Drive shaft with a safe clutch to avoid misuse and damage to the machine (the machine is not fixed, the host can not start operation).
3)Pneumatic interlocking device .
4) Host motor start up protection device .
2, Adsorption leading edge Feeder system
1)lead edge feeder institution can greatly reduce clogging phenomenon in the process of cardboard paper.
2)Suction fan auxiliary feeder,make sure the winding paperboard feeding smoothly,The wind volume can be adjusted according to the size of the board.,The maximum guarantee of the vacuum adsorption of cardboard, so that more accurate to send paper.
3)front baffle and back baffle adopt manual adjust gap, feeder lift-right baffle adopt electric adjust gap.
4)feeder wheels adopt polyurethane material made,Large friction and long life.
5)it suitable for 3layers,5layers and 7layers corrugated cardboard, include E flute cardboard.
6)supply paperboard counter,set-up and Display production quantity.
3, dust-extraction unit
1)Equipped with dust removal mechanism ( remove dust brush ), effectively remove cardboard surface impurities , improve the quality of printing .
4, feeding roll
1)out diameter is 127mm.
2)Seamless steel pipe , parcel wear-resisting rubber , correction and balance
3)Lower feed roller chrome plating.
4)feeder Paper roll gap dial manual adjustment, adjustment range 0-11mm.
5, Operation control switch (PLC computer control)
1) the control panel is equipped with 10 Inch Touch screen, can control the paper feeding, printing, slotting, die cutting, easy to operate.
6, Automatic zero return device
1)Paper feed, printing, slotting, cutting part of the electric automatic return to zero.
2) In general, the use of automatic paper box to zero device, try to print two can be adjusted to the correct position, reduce waste.
Printing unit (Full-range adsorptive paper feeding, ceramic mesh roller with scraper system)
1, printing roller
1) out diameter is 390mm(include printing plate 405mm).
2) Steel plate material, surface grinding, hard chromium plating.
3)Balance correction, smooth operation.
4)Fixed ratchet wheel shaft.
5)Full format plate ditch, suitable for 9mm hanging version.
6)Loading and unloading printing plate, pedal switch electric control positive and negative.
7)Loading and unloading the printed board, pedal switch electric control positive and negative.
2, printing pressure roller
1),out diameter is 154.3mm
2),Steel pipe surface grinding, hard chromium plating.
3),Balance correction, smooth operation.
4),printing pressure roller gap dial manual adjustment,adjustment range 0-12mm.
5),Feeder roller gap dial manual adjustment, adjustment range is 0-12mm.
3, Uniform Ink Part
Introduction of Ceramic Roller with Ink Scraper System
1) Ceramic mesh roller with semi-closed scraper.
2) Scraper system adopts American technology, fine printing, ultra-low loss.
3) Preventing volatilization is more environmentally friendly.
4) Ink-touching plate adjustment of reticulated roller, which is pneumatic down-pressing action, automatic hoisting protection device when air stops, while the center of transmission gear remains unchanged.
5) Micro-adjustment of gap between screen roller and plate wheel.
6) Automatic induction ink detection system, including warning lights and alarm bells.
7) Ink pump is a single diaphragm pneumatic pump, which can recover the accumulated water filter and ink circulating system inside and inside the pump.
8) The cartridge is quickly dismantled and the inner surface is sprayed with Teflon to improve the cleaning efficiency.
9) Closed cover and recycling ink tank device, easy to clean and leak-proof design.
10) Introduction to Scraper
* Professional manufacturer to ensure the quality of scraper system.
* The scraper inner chamber is sprayed with Teflon material, so that the ink will not adhere to the chamber and is easy to clean.
* Single scraper form makes disassembly more convenient. (Double scrapers are available)
* Hydraulic propulsion mode, so that the scraper smoothly adheres to the ceramic roller, scraping ink more evenly.
* Ink deficiency automatic alarm device to avoid damage to scraper and ceramic mesh roller.
* Automatic Cleaning System for Scraper and Ceramic Screen Roll
4, Suction bellows box
1) The press printer roll is refined by high quality seamless steel tube, and its surface is refined by grinding and hard chromium plating.
2) After static balance, the press printer roll is corrected by dynamic balance and runs smoothly.
3) Multi-group arrangement of row rollers ensures smooth and smooth paper feeding.
4) The lift clearance of suction bellows box adopts electric adjustment/digital control, and the man-machine interface sets the automatic positioning.
5) The fan of vacuum adsorption box is controlled by frequency converter, and the air volume can be adjusted.
5,feeder paper up-down roller
1),up roller:diameter is 100mm Seamless steel pipe, with 2 paper feed wheel.
2),down roller:out diameter is 154.3mm Seamless steel pipe, surface grinding, hard chromium plating.
3),feeder roller gap dial manual adjustment,adjustment range is 0-12mm.
6, phase adjustment mechanism
1)planetary gear structure.
2)horizontal position, manually adjust the distance of a total of 20mm.
3)the printing plate roller adopts frequency converter to adjust the phase, return to zero and adjust the speed of the plate, adjust the version of high precision.
7, Ink circulation
1),Pneumatic diaphragm pump for ink stability, simple operation and maintenance.
2),Ink filter, filter impurities.
8, Printing phase fixing device
1),Pneumatic brake mechanism.
2),When the stage is separated or adjusted, the brake mechanism is restricted to rotate, and the fixed point of the original gear position is maintained.
Drying part (the first group)
1) Infrared heating system, rapid and stable temperature rise. The heating power of each group is about 20 kw.
2) Temperature constant temperature control, sectional heating, saving electric heating power.
3) Temperature alarm, automatic alarm when the temperature exceeds the standard, safe and reliable.
4) Strong fan circulation makes the drying speed faster.
5) The drying box is pneumatically adjusted for lifting and lowering, which is convenient for installing and replacing lamp tubes, and for adjusting the drying effect at the same time.
Contact Person: Roy Xu